In our production program, we have the following groups of castings:
Depending on the type and end use, we produce castings in the quality from SL100 to SL350, as well as fireproof cast iron VHSL,and we provide to our customers relevant certificates of chemical composition and mechanical properties.
As a separate part of the CAST IRON group of materials, there is our standardized manhole program . We can offer frames and lids of various sizes and capacity, from ” light garden” capacity of150kg, to “heavy” for cargo transport capacity of 40 tons. We also offer rainy grids with and without frames of different sizes and capacity.
CARBON STEEL CASTINGS
This group includes carbon steels , where other elements, excluding carbon, with their mass fraction do not have a significant effect on the mechanical properties of the parts. These are mainly steels for general purpose (SRPS ČL0400, ČL0500, ČL0600 etc.).
ALLOY STEEL CASTINGS FOR IMPROVEMENT
This material is used for making structural parts that are exposed to large and complex stresses during exploitation. Improvement thermal process – hardening and tempering,provide this materials with optimal mechanical properties. Parts made of these materials are used only in improved quality, because only then they have high yield strength , good toughness and tensile strength. They are especially recommended for dynamically strained parts and“alternating stress and shock” parts. This group includes steels with following SRPS marks: ČL4730, ČL4731, ČL4732, ČL7130, ČL7431 etc .
ALLOY STEEL CASTINGS – WEAR RESISTANT
This material is used for the production of parts for mining and cement industry .They request spare parts which have higher wear resistance , so this group of materials is suitable for making mill lining plate , coating , jaw crusher , hammer crusher , tooth excavators, caterpillars articles and so on. This group of steels is also called ” manganese steels “, because manganese is an important alloying element . This group includes steels with following SRPS marks: ČL3134 , ČL3160 , ČL3460…
STAINLESS AND CHEMICALLY RESISTANT STEEL CASTINGS
Parts made of this cast steel, are commonly used in the chemical, food , oil and textile industry and pulp industry where chemical stability is a very important characteristic . This group includes steels with following SRPS marks: ČL4570, ČL4571, ČL4572, ČL4573, ČL4574…
FIRE RESISTANT STEEL CASTINGS
This materials are used in conditions with extremely high temperatures ( up to 1200°C ). This group includes steels with following SRPS marks: ČL4271, ČL4272, ČL4273, ČL4576, ČL4577, ČL4578 and others.
If you are not sure of the quality of the material that is required in your particular case , please feel free to contact us and our experts will help you with the selection of the most appropriate materials.